VHT FLAMEPROOF™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating can withstand intermittent temperatures of up to 2000° F and is widely used on exhaust systems, turbo housings and exhaust valves.
Temperature 1300°F-2000°F (704°C-1093°C) Intermittent
Dry Time Curing time required and can be done on or off vehicle (see below).
Applications Headers, Exhaust Systems, Piston Domes, Inside Heads
Finish Flat
SIZES
1 Quart Non - Aerosol
11oz Aerosol
HOW TO USE
Available in These Colors:
FIND A RETAILER
Curing FLAMEPROOF™ VHT FLAMEPROOF™ Coating only attains its unique properties after correct curing (refer to instructions on the can).
-
On the Vehicle
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minute
- Run under normal operating conditions for 30 minutes
-
Off the Vehicle
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes
Coating System VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime
SP100
FLAMEPROOF™ Primer
Coat
SPXXX
FLAMEPROOF™ Color
Finish
SP115
FLAMEPROOF™ Clear
Coating System VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime
SP100
FLAMEPROOF™ Primer
Coat
SPXXX
FLAMEPROOF™ Color
Finish
SP115
FLAMEPROOF™ Clear