important: Nuts and bolts on your bike should always be tightened to the manufacturer's specifications.

How to Shift Your Gears

Learn how to use your full range of gears: applies to 21, 24, and 27 speed shift systems.

Video updates

  • 02:14 - Never use either the large/large or small/small gear combination!

Most bikes these days come with ’21 speeds’. However, this doesn’t mean you have 21 useable gears. Actually, on a 21 speed system it’s closer to 13. A lot of people get confused by all of the gear combinations available. I myself didn’t understand it when I first started using a multi-speed bike, so today we’ll learn how to use your gears most effectively.

It’s very important not to shift under pressure, as this will cause shift problems and damage your drivetrain. If you’re going uphill and you need a lower gear, keep pedaling, but ease off and pedal lightly while you shift.

Most systems have three gears on the front, which are controlled by your left shifter. The rear gear cluster usually has 7 gears, with some systems having 8 or 9. Not to worry, the concepts here are the same.

For most everday riding, you’ll want to keep your chain on the middle ring on the front, or number 2 on your left shifter. This allows you to use the full range of rear gears. Number 1 on your right shifter is the easiest gear for climbing hills, as it puts your chain on the largest rear sprocket. Number 7 on your right shifter is the hardest gear for going really fast, and it puts your chain on the smallest rear sprocket.

I find it helps to think of numbers 1 and 3 on your left shifter as options for extreme circumstances.

If you’re climbing a really tough hill and your left 2 and right 1 combination aren’t easy enough, you can shift your front derailleur to number 1 which drops the chain down to the smallest front chainring. While you’re in the smallest front gear you can shift the rear gears between 1 and 3 for a finer range adjustment, but you should always shift the front back to 2, or the middle chainring before using gears 4-7 on the rear.

If you’re going really fast and need a harder gear, and your left 2 and right 7 combination isn’t fast enough, you can shift your front derailleur to number 3 which pulls the chain up to the largest front chainring. While you’re in the largest front chainring you can shift the rear gears between 5 and 7 for a finer range adjustment, but always shift the front back to 2, or the middle chainring before using gears 1-4 on the rear.

Never use the full range of rear gears when you’re in either the small or large front sprockets (number 1 or 3 on the front shifter). This causes too great an angle in your chain line, which can cause noise and shifting problems.

Related Links

Recommended Tools

Categories

Discuss this topic in the Bicycle Repairs and Mechanics Forum

I'm slowly eliminated all LBSes in my area as options for servicing, LOL. The latest one has been struck off my list after watching, pained, their approach to removing the axle end caps from a hub with cartridge bearings. Suffice to say, I finally ordered a blind bearing puller kit and a bearing press kit. If you want something done properly, you have to do it yourself! Have you bought any nic...

Read more

Hi Ive joined to specifically ask about a problem which may have been covered before Im sure. My right pedal broke so I had to replace it. Then had issues getting the new pedal to go on straight so I was riding with it slightly at a bend. But then it just came loose and fell off. Problem is now the thread seems busted and the pedal just slots in with no screwing needed because the hole is enlar...

Read more

Trek domane tyre

Latest post 4 days ago

Hi I have a trek domane 2.3, and I have changed the rear tyre to 28 (it was 25 originally) The tyre rubs with the brake arm (v brake), I fear it doesn’t seem to be compatible Is there any way to adjust the position of the brake arm? I just need it to ne around 2mm higher Thanks...

Read more

Modern rims crack at spoke holes

Latest post 4 days ago

Recently, I was in one of the local bike shops. Someone had brought a bike back to have the back wheel re-trued. There were actually cracks in the rim, originating from the spoke holes. I have had the same problem with my bike. In past decades you could buy a bike, and the wheels were strong. With modern rims, the aluminum is getting thinner and thinner. Now the rims crack. With heavy riders, a...

Read more

Cup and cone hubs have long been considered simple, durable, easily maintained, and reliable. Having messed around with a couple of older hubs tonight, I ended up looking at my sealed-bearing hubs with increased fondness. I'm wondering what other people think. Should we old farts just accept that modern hubs with cartridge bearings are the way forward?...

Read more

Falling back

Latest post 4 days ago

In December of 2009 I had a first generation carbon fiber fork break on my road bike and it dropped me right on my forehead. This gave me a very serious concussion and both ER doctors and most neurologists do not take them serious. So it took about two years of my slowly dying since I couldn't even remember to eat before my Cop friend took me to a proper neurologist who diagnosed it as a concussio...

Read more

Derailluer Hanger Alignment Tool

Latest post 4 days ago

I cannot express enough about the importance of this tool when having to deal with multi speed bicycles. I have been in the bicycle biz in one fashion or the other for over 30 years. Have sold many new bicycles and 90% have been out of wack fresh from the box. With used bikes crossing your path you should just expect it to be bad. And never string new cables without checking the hanger first, ever...

Read more

Hey guys, First post here. I've tried searching, but I don't know what you call this. I have a vintage Schwinn Passage that I picked up a few months ago. At first it worked well, but recently it's been giving me trouble. When I shift, the chain pops into the higher (larger) gear, but then sits on top of the chain ring. What ends up happening is that the chainring will keep turning, and eve...

Read more

Went to fix the slow leak on my gravel bike's rear tyre. Found the culprit: a small cut near the middle of the tyre. The good news is it gave me an excuse to order a pair of Panaracer 43c semi-slick GravelKings (most of my local rides are more road-focused) to try out. Meanwhile, I was considering ye olde vulcanised patch repair to the inside of the tyre and superglue to the outside, but I'm thi...

Read more

I shipped my Dawes Super Galaxy home and have just had an unfortunate experience of not being able to re-attach my left Shimano M324 pedal. It looks threaded, but I still have hopes as I think it's only the top couple of rings on the inside. [attachment=5341] From what I can tell the pedal thread is fine. I know there are tools out there to fix a thread. I'm hoping that mine is not so bad that...

Read more

I bought this Vilano Hybrid in 2020 as my “old person’s Chinese Cheapie”. It was - (and is) - FAR from equaling the “serious” bikes that I owned back in the 1990’s. The first Trek I had was a gorgeous blue road bike - worthy of all the gawkers it inspired. My Klein Pro Race MTB was the finest all-round “terrain-chewing animal” I ever mounted. It never failed. It never said...

Read more

Crankarm for Diamondback

Latest post 3 weeks ago

Will a FC-CT93 fit a FC-TY40 crank arm...

Read more

I am heavier than many cyclists. I ride longer distances then many cyclists. A lot of my riding is on rough tracks. While riding my 29 inch mountain bike, spokes broke in the back wheel. https://forums.bikeride.com/thread-8373.html I replaced them with 3 mm spokes. Not long after, cracks formed in the aluminum rim in two places. It became obvious, I could not go on repairing this wheel. I came...

Read more

New Wheel Question

Latest post 4 weeks ago

I just ordered and received new wheels for my bike. Both the old and new are TLR, but I run with tubes. On my old rim, tape is installed. So…when I ordered the new wheels, I also ordered tape. Today, when the new wheels arrived, I noticed that both included a plastic (?) rim strip. I installed the strip on both rims, which gets me to my question…. Do I also need the rim tape? I would think not...

Read more

New Wheel Question

Latest post 4 weeks ago

I just ordered and received new wheels for my bike. Both the old and new are TLR, but I run with tubes. On my old rim, tape is installed. So…when I ordered the new wheels, I also ordered tape. Today, when the new wheels arrived, I noticed that both included a plastic (?) rim strip. I installed the strip on both rims, which gets me to my question…. Do I also need the rim tape? I would think not...

Read more